Nice product04/15/2024 ByJ. Patrick Collins I ordered this in hopes it would work for a boat I an restoring. Product is as stated on the web site. I am not able to use for what need it for but have another project that I can use it Service was fast and easy. Delivery also came in good time
Securing04/10/2024 ByDavid Kay Looks like a pressure fit is the only viable method to secure this molding. I am still looking, but have struck out so far on a glue that will hold this polypropylene product. Our responseWe have heard of customers putting masking tape or duct tape over the spine to make it thicker and then it will stay in a loose slot, but if the slot is too large for that another option would be wood glue in the slot and then tape or clamp the t-molding into place while it dries. The glue will not stick to the plastic but it will harden around the barbs on the spine to hold it in place.
Perfect fit01/16/2023 ByKevin V. I had placed an order for some white T-molding and after the fact I realized that I had ordered the incorrect size. I quickly emailed
Customer service & fitment01/16/2023 ByKevin V. I had placed an order for some white T-molding and after the fact I realized that I had ordered the incorrect size. I quickly emailed customer service and they were able to exchange it quickly before it got sent out. I appreciate the excellent service and the fitment was spot on! Look forward to doing business with again.
Easy to work with.09/14/2022 ByRyan Dunn My son and I are building an arcade cabinet and adding t-molding has really made the cabinet stand out. It is easy to install and work with. Easy to cut and stays in place once pushed in. We did glue the ends so they didn’t come out of the slot after we installed it but the rest has stayed in the slot very well.
Perfect Fit for my Boat07/20/2022 ByChuck Kletecka Renewing the interior of our 1992 Tiara Yacht. Great fit and easy to replace. Bought a white Mallet for tapping it in place.
Great Product10/18/2021 ByDavid Woeckener So this molding is great and it worked awesome for my arcade cabinet. One thing to keep in mind, it's plastic and when it's wrapped into a coil as shipped, it can be hard and stiff. What I did was heated it in the over on a cookie-tray at the lowest setting my oven would go (175deg F) and made it easier to bend and shape. Do note that it fits a little loose inside the groove (as I used the diagram and bought myself a 3/32" slot cutter, not the 1/16" slot cutter, so that might have played a role)... but needed a little extra glue to hold it in place! BEST GLUE to use I found was 2-part epoxy glue. I tried gorilla glue on my test piece... and it expanded and bled out yellow glue when it dried - so thankfully if you have any kind of spill-off from the epoxy glue (doesn't expand)- it's clear and not as noticeable!
excellent product10/11/2021 ByRobert Speer excellent product , very quick shipping very well pleased....
Non-typical Application08/17/2021 ByMerrick Fleisher The molding was used in non-typical application for video shoot back drop. Applied as seams between foam board panels to give the appearance of a wall in an office environment. Worked better than expected.
Boat trim - Tiara06/30/2021 ByRichard Roeske Let's start with Service: Everything they stated it would be, it was. Delivery: Fast and accurate. Quality: High quality from end to end with no imperfections. I used this on a Tiara boat to trim out the headdoor and it looks and worked great. Happy I found this supplier and would order from them again.
