1/2" White T-Molding

Average rating:
average rating 100%
| Read all reviews

Slot Width 1/16"
Starting Price $0.37 per foot
Quantity   20 - 249     250 - 999     1000+  
Price $0.37 $0.31 $0.27
  • More Details
  • Reviews
  • Related Items:

1/2" White T-Molding

This 1/2" white t-molding is priced per foot, and will ship as one continuous piece of molding up to 250ft long.

1/2" White T-Molding Reviews

Read all reviews

Featured positive reviews:

average rating 100%
Great Product 10/18/2021
By David Woeckener
So this molding is great and it worked awesome for my arcade cabinet. One thing to keep in mind, it's plastic and when it's wrapped into a coil as shipped, it can be hard and stiff. What I did was heated it in the over on a cookie-tray at the lowest setting my oven would go (175deg F) and made it easier to bend and shape. Do note that it fits a little loose inside the groove (as I used the diagram and bought myself a 3/32" slot cutter, not the 1/16" slot cutter, so that might have played a role)... but needed a little extra glue to hold it in place! BEST GLUE to use I found was 2-part epoxy glue. I tried gorilla glue on my test piece... and it expanded and bled out yellow glue when it dried - so thankfully if you have any kind of spill-off from the epoxy glue (doesn't expand)- it's clear and not as noticeable!
average rating 100%
1/2" WHite T-Molding 09/30/2017
By Henry Hartman
Took me a long time to find this size item on the internet. Had to be exactly 1/2". Not easy to find especially in 'short' length ordering multiples. Twenty feet worked perfectly. I needed it for repair on my son's sailboat; various places - battery compartment cover, closet door, etc. So far, we are very pleased. Looks just like the same material used by the boat manufacturer - Catalina. Very much appreciated. I'll refer others and come back to you for other needs I can foresee down the road. Thanks. Harry
average rating 100%
Good quality 02/06/2019
By Mike W
I've purchased T-molding from T-molding.com years ago as well. Quality seems to be consistent. The width is very consistent throughout the length of it. What I do is measure, then route a tiny area, pop in a small piece of molding to ensure the top edge runs flush with the surface. As long as you are steady routing the slot, there should be no need to trim the molding after installing. The hold is good, I've never used adhesives and never had any come loose.

1/2" White T-Molding Related Items:

Whiteside Slotting Cutter 1/16" 3-Wing
Average rating:
average rating 98%
Use with T-Molding that has a 3/32" wide spine (including the barbs).

Requires a slot cutting arbor, such as the A200B or equivalent.
Price $18.95
Whiteside Slotting Cutter Arbor 1/4" Shank 2-3/8" Length
Average rating:
average rating 96%
For use with all of our slot cutter router bits, for routers that use 1/4" shanks.
Price $10.95
Share on Facebook Pin It